Page 1 of 1

Access port to tagged vlan

Posted: Thu Sep 12, 2019 11:24 am
by Mrnous
Hi, maybe I'm totally stupid but somehow I'm not doing it, so please give advice :)

I have two different networks access port - untagged vlan on ether9 (i want tagged vlan 464) and ether5 (want tagged vlan 465) on my mikrotik and what i need to do is trunk port on ether2 and sfp-sfpplus1 with these vlans and my internal network in mikrotik to connect two switch Planet. So i need to planet trunk port VLAN 464,465 and internal (maybe vlan 5) It is possible?

Re: Access port to tagged vlan

Posted: Thu Sep 12, 2019 3:13 pm
by anav
I would add a diagram to help the reader as your explanation is lacking.

I would also state the problem in requirements. What would you like to accomplish for users, without talking about networks, or equipment.

Re: Access port to tagged vlan

Posted: Thu Sep 12, 2019 4:21 pm
by Mrnous
This i want :) from 2 acces ports to mikrotik trunk port with internal network. On ZTE i cant do Vlans...
Image

Re: Access port to tagged vlan

Posted: Thu Sep 12, 2019 5:02 pm
by tdw
Replace your two existing bridges (bridge & bridge_verejny) with a single VLAN-aware bridge, see https://wiki.mikrotik.com/wiki/Manual:I ... _Filtering and there are many posts on the forms too.

Re: Access port to tagged vlan  [SOLVED]

Posted: Sun Sep 15, 2019 1:59 am
by anav
A good reference is this one has examples and when you understand it you are ready to configure!!
viewtopic.php?f=13&t=143620

This may also be useful to read as well.
viewtopic.php?f=13&t=143620

( I do not know what a ZTE is?? where is your ISP............)