coming from LANCOM and CISCO world, I am used to trouble with installations ... but now I am at a wall and dont see the door :-p
I want to configure the MT for future use.
1) made a DHCP client on Eth1 and plugged that into the LANCOM, so I can access the MT with normal IP (works)
2) connected VDSL Modem on Eth12, configured Interface and PPPoE for later Internet access (works)
3) created adress pool for DHCP
4) created DHCP server on ETH5 -> Always status=INVALID !??
Lancom is 10.1.1.1 in 10.1.1.0/24
MT is 10.2.2.0/24, address on Eth1 is 10.2.2.1 static and 10.1.1.20 by DHCP from Lancom
pool is 10.2.2.180-254
Before you debug my current faulty configuration, I'd like to ask:
What would be a working config for ONE DHCP server serving all ETHx on the MT?
I dont even need IP addresses on the Eth ports, they can simply behave like a switch.
I dont want to use another external switch because 10 ports are more than I need (RB1100).
thx in advance