I would like to set up a VPN.
I found a video tutorial: https://www.youtube.com/watch?v=8SvfARW469E
It's working well inside the Network but I can't connect to a VPN from outside the network.PPP -> Interface -> PPTP Server -> Enabled -> OK
IP -> Pool -> + -> PPTP_Pool, 192.168.2.10-192.168.2.100 -> OK
IP -> Firewall -> NAT -> Chain: srnat, Srcadress: 192.168.2.0/24 -> Action -> Action: masquerade
PPP -> Profiles -> PPTP Profile, Local address: 192.168.0.85, Remote Address: PPTP_Pool -> OK
PPP -> Secret -> + -> Name: VPNName, Password: VPNPassword, service: pptp, Profile: PPTP_Profile->OK
I added:
but unfortunately it didn't help/ip firewall filter add chain=input protocol=tcp dst-port=1723 action=accept comment="Allow IN PPTP/TCP1723" disabled=no
/ip firewall filter add chain=output protocol=tcp dst-port=1723 action=accept comment="Allow OUT PPTP/TCP1723" disabled=no
/ip firewall filter add chain=input protocol=gre action=accept comment="Allow IN PPTP/GRE" disabled=no
/ip firewall filter add chain=output protocol=gre action=accept comment="Allow OUT PPTP/GRE" disabled=no
I also found this:
But it didn't help either. I am running out of ideas, please help./ip firewall service-port enable pptp
When answering, please take into account that I'm just starting my adventure with MikroTik.
I wish you gifts like this!