Hello so the current setup is this we are using the sfp 1 one port as the WAN port with an ip address to access via web and winbox , this ip address at the same time is also used as a tunnel connecting other mikrotiks using this very same ip address

What we want to do
We want to set up a different port to access the mikrotik a private ip address on a different port , how can we achieve this without touching the sfp 1 WAN port ??

Thanks

/ip address

Add desired access address, assign it to appropriate interface.

Hi Aerowinder thanks for the reply

so its only those steps , i dont need to do anything else ?

ive tried it its not working yet
ive added the ip address in the
web Ip / addresses and add from their .

i am not able to access the mikrotik from winbox using the ip address set on ethernet port 5

What’s your firewall config look like?

Hi
i have only two rules 1 is accept input chain protocol tcp dst port 8291 and 80 for winbox and http src address is allowed in
the second one is drop , input , tcp , dst port 8291 and 80 , is the same rule except it is dropped

Are you trying to make http and winbox available on the WAN interface? Except for the http (hopefully port forwarded to a webserver and not the one integrated in the Mikrotik), I would like to advice you to only use these services locally or make them available through VPN.

Can you please post an export hide-sensitive?

Hello yes
so a bit information
its by using a vlan that is coming in via an uplink trunk port
so on this vlan i want set the management ip address , it is not on the wan port but another ethernet port
i will get that info

what i did already is created this vlan
added the vlan under the ethernet port in question
added the ip address on the vlan , tried also on the ethernet

not able to get to the device via winbox

Any firewall?

Default setup allows management connections via interfaces (either physical or vlan or ...) which are members of LAN interface list.

i have only two rules 1 is accept input chain protocol tcp dst port 8291 and 80 for winbox and http src address is allowed in
the second one is drop , input , tcp , dst port 8291 and 80 , is the same rule except it is dropped

Hi !
as far as I can see, Winbox uses tcp port 8291 & 50054 in both directions.

gtx Bolle

Lan interface list
ok i will have to check this
so what i did was create a bridge with the vlan in question ,and add ip address to the vlan interface
the interface coming iinto the mikrotik interface is trunk port
i need to manage the mikrotik throguht this ip address via this vlan on ethernet interface 5

So basically what i want to do is access the mikrotik via another port that is not the WAN port
is this possible
it needs to go via a vlan with the ip address on their .