Hi
Thank you very much for your reply.
I'm not familiar with script code, still learning. I have added the routes through winbox terminal, routes are created but still having some issues.
Basically I'm trying to setup the router for smartdnsproxy streaming services.
hAP ac2 6.46.4 Default quick set home ap dual config
LAN: 192.168.7.1
I have PPPoE connection, disabled use peer DNS.
Added IP-> DNS-> DNS1: 154.127.57.224 DNS2: 129.232.164.26, Allow remote routes
Added IP-> DHCP Server->Networks-> set as same DNS servers as above.
/ip route
add dst-address=8.8.8.8 gateway=192.168.7.1 distance=1
add dst-address=8.8.4.4 gateway=192.168.7.1 distance=1
add dst-address=45.57.62.0/24 gateway=192.168.7.1 distance=2
add dst-address=45.57.63.0/24 gateway=192.168.7.1 distance=2
Does the code above mean the same as below?
Destination IP Address: 8.8.8.8
IP Subnet Mask : 255.255.255.255 (or /32)
Gateway IP: 192.168.7.1
Metric: 1
Interface: any other than WAN (preferably LAN)
Destination IP Address: 8.8.4.4
IP Subnet Mask : 255.255.255.255 (or /32)
Gateway IP: 192.168.7.1
Metric: 1
Interface: any other than WAN (preferably LAN)
Destination IP Address: 45.57.62.0
IP Subnet Mask : 255.255.255.0
Gateway IP: 192.168.7.1
Metric: 2
Interface: any other than WAN (preferably LAN)
Destination IP Address: 45.57.63.0
IP Subnet Mask : 255.255.255.0
Gateway IP: 192.168.7.1
Metric: 2
Interface: any other than WAN (preferably LAN)
When I ping IP 8.8.8.8 & 8.8.4.4 i still get a reply, it supposed to get a reply from 192.168.7.1: Destination host unreachable.
Also had these configured in OpenWRT
Port Forward:
Traffic Rule:
Can you please advise on how to configure these as well?
Thank you