Community discussions

MikroTik App
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

LHG 6 LTE - locking cell (edit)

Fri Mar 20, 2020 8:19 pm

Hey guys,

It's not tthe first time I work with microtik but certain time has passed and now I can't figure it how to solve this.

First I got an LHG LTE6 kit (RBLHGR&R11e-LTE6) and already put my sim card and the 4G LTE just doesn't connect. The SIM card doesn't have a PIN.

[admin@MikroTik] > interface lte info 0
pin-status: unknown
functionality: tx and rx rf circuit disabled
manufacturer: "MikroTik"
model: "R11e-LTE6"
revision: R11e-LTE6_V020
imei: 356662100315644

Already choose the bands that Portugal uses. 1,3,20,38.


Can someone please help me fix this? Since I need to start working from home because corona It's very important.

Thanks.
Last edited by orvis on Mon Mar 23, 2020 2:07 am, edited 1 time in total.
 
dad2312
newbie
Posts: 44
Joined: Sun Nov 17, 2019 12:55 pm

Re: LHG 6 LTE - CAN'T START LTE

Sat Mar 21, 2020 8:14 pm

LHG don't recognise your sim ?

check if you have put your sim card the right way round (and not pushed it too far)
 
can you publish the result of
new terminal
admin@.........>interface lte info lte1
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - CAN'T START LTE

Sun Mar 22, 2020 10:49 pm

LHG don't recognise your sim ?

check if you have put your sim card the right way round (and not pushed it too far)
 
can you publish the result of
new terminal
admin@.........>interface lte info lte1
Hey, first of all thanks for trying to help ;)


[admin@MikroTik] > interface lte info lte0
no such item


[admin@MikroTik] > interface lte info lte1
pin-status: unknown
functionality: tx and rx rf circuit disabled
manufacturer: "MikroTik"
model: "R11e-LTE6"
revision: R11e-LTE6_V020
imei: 356662100315644
-- [Q quit|D dump|C-z pause]
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - CAN'T START LTE

Mon Mar 23, 2020 1:38 am

Well...

After taking out the SIM CARD and clean It with alcohol It started to work..ROFL!!!

Now I have an Issue that, the TIK, scan and find too many networks with bad values (the coverage here is awful) and doesn't lock in one, so keeps changing and I don't have service at all...at the moment I'm with the huawei b310 working lol

After reading the Wiki I've found this to lock:

/interface lte at-chat lte1 input="AT*Cell=2,3,,1300,384"

If I want to lock to the cell 518401 band 20, is with that command? If yes can someone help?

Many thanks ;)


Edit:

Network Type LTE
Cell Identify 518401
Cell Identify (hex) 7e901
eNB ID 2025
eNB ID (hex) 7e9
Sector ID 1
Sector ID (hex) 01
RSRQ: -14dB
RSRP: -93dBm
RSSI: -71dBm

SPEEDTEST gaves me
PING ms
14
DOWNLOAD Mbps
4.09
UPLOAD Mbps
11.26
 
dad2312
newbie
Posts: 44
Joined: Sun Nov 17, 2019 12:55 pm

Re: LHG 6 LTE - locking cell (edit)

Mon Mar 23, 2020 1:00 pm

You need EARFCN and PCI

/interface lte at-chat lte1 input="AT*Cell=2,3,,EARFCN",PCI"

you can see these informations with :
\interface lte> cell-monitor
number: lte1
 
User avatar
SiB
Long time Member
Long time Member
Posts: 598
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: LHG 6 LTE - locking cell (edit)

Wed Mar 25, 2020 1:23 pm

and if you are connected to proper Tower, then you can read this info just from current connection details in Cellular tab
Image
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - locking cell (edit)

Thu Mar 26, 2020 6:05 am

and if you are connected to proper Tower, then you can read this info just from current connection details in Cellular tab
Image
Thanks mate but which tab do you have that info? after I go the cell It only appears this...
You do not have the required permissions to view the files attached to this post.
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - locking cell (edit)

Thu Mar 26, 2020 6:08 am

You need EARFCN and PCI

/interface lte at-chat lte1 input="AT*Cell=2,3,,EARFCN",PCI"

you can see these informations with :
\interface lte> cell-monitor
number: lte1
Very useful mate, thanks a lot!
Which one do you recommend?
Also another question, sorry...But since I have an RBLHGR&R11e-LTE6 isn't suppose to have aggregation? Need to turn on, or the signal is so crap that only connects to one?

best regards.
You do not have the required permissions to view the files attached to this post.
 
User avatar
SiB
Long time Member
Long time Member
Posts: 598
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: LHG 6 LTE - locking cell (edit)

Thu Mar 26, 2020 11:28 am

orvis
Thanks mate but which tab do you have that info?
Update ROS to newer and you see that cell-monitor will be works better and The Cellular tab will be with more details.
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - locking cell (edit)

Fri Mar 27, 2020 6:14 pm

orvis
Thanks mate but which tab do you have that info?
Update ROS to newer and you see that cell-monitor will be works better and The Cellular tab will be with more details.

For which version? The lastest? Isn't any bug which will affect my already poor performance? XD
 
User avatar
SiB
Long time Member
Long time Member
Posts: 598
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: LHG 6 LTE - locking cell (edit)

Fri Mar 27, 2020 6:32 pm

orvis
For which version? The lastest? Isn't any bug which will affect my already poor performance? XD
You are a administrator of your device. You should know all ± of ROS. You can select beta channel or stable. Or even ROS7.
But do a upgrade !
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - locking cell (edit)

Fri Mar 27, 2020 7:24 pm

orvis
For which version? The lastest? Isn't any bug which will affect my already poor performance? XD
You are a administrator of your device. You should know all ± of ROS. You can select beta channel or stable. Or even ROS7.
But do a upgrade !
Done ;) Thanks mate!!
Still, speed so low....
You do not have the required permissions to view the files attached to this post.
 
orvis
just joined
Topic Author
Posts: 8
Joined: Fri Mar 20, 2020 8:03 pm

Re: LHG 6 LTE - locking cell (edit)

Fri Mar 27, 2020 8:25 pm

orvis
For which version? The lastest? Isn't any bug which will affect my already poor performance? XD
You are a administrator of your device. You should know all ± of ROS. You can select beta channel or stable. Or even ROS7.
But do a upgrade !
Hey, found the best tower, speed reaches like 17mbps OMG....Got only one problem, when connect It doesn't show me the PHY CELL ID.

Do you know any way to find this?
Thanks.
You do not have the required permissions to view the files attached to this post.
 
User avatar
SiB
Long time Member
Long time Member
Posts: 598
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: LHG 6 LTE - locking cell (edit)

Fri Mar 27, 2020 10:45 pm

Use WinBox 3.22
enable logs with topic=lte
Log - use filters for messages with CREG or $CREG
The last one is phy-cellid in hex. Use Windows Calc (calc.exe) in Programmer mode to enter hex from log and see the proper decimal value.
Image
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
I will be at MUMEUROPE Prague on ?? ?? 202?

Who is online

Users browsing this forum: No registered users and 96 guests