![Smile :)](./images/smilies/icon_smile.gif)
It is my understanding that a PVLAN is a good option to achieve better security through isolation, but it seems I need some help with setting it up on my new RB4011
![Smile :)](./images/smilies/icon_smile.gif)
I have a TP Link T2600G that I already set up with a primary VLAN (ID and PVID 111) and a secondary community VLAN (ID and PVID 3540).
Primary VLAN is on trunk port 1/0/24 and connected to port ether5 on a RB4011.
DHCP servers are set up on the RB4011 - as soon as I switch from VLAN to Private VLAN the hosts connected to the switch can't get an IP.
The info in the manual (https://help.mikrotik.com/docs/display/ ... VLAN+Table) is not really helpful as the PVLAN is set up on the switch without any mention of the router set up.
I tried following the info on VLAN tunnelling and Tag stacking but I didn't get results.
What I'm trying to achieve is
- a promiscous port on ehter5 and 1/0/24
- DHCP server only on the RB4011
Any help or pointer or tuts on a similar setup are most appreciated
![Smile :)](./images/smilies/icon_smile.gif)