Community discussions

MikroTik App
 
homelyn
just joined
Topic Author
Posts: 1
Joined: Thu Oct 15, 2020 3:53 am

Slow upload speed with MikroTik hEX S RB760iGS

Thu Oct 15, 2020 4:06 am

Getting a very low upload speed after switching to MikroTik hEX S RB760iGS router. My Askey wireless router was constantly giving 42Mbps but this one doesn't go higher than 30Mbps. Currently connection is Port 1 goes to Arris SB8200 modem, Port 2 goes to my computer. Very disappointed and almost give up on this device. Appreciate any help.

# oct/14/2020 18:05:20 by RouterOS 6.47.4
# software id = RCUH-PLSF
#
# model = RB760iGS
# serial number = AE370C1CBD99
/interface bridge
add admin-mac=48:8F:5A:83:01:01 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] advertise=1000M-full
set [ find default-name=sfp1 ] disabled=yes
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.1.10-192.168.1.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=sfp1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.1.1/24 comment=defconf interface=ether2 network=\
192.168.1.0
/ip dhcp-client
add comment=defconf disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.1.0/24 comment=defconf gateway=192.168.1.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.1.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/system clock
set time-zone-name=America/Los_Angeles
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
You do not have the required permissions to view the files attached to this post.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19125
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: Slow upload speed with MikroTik hEX S RB760iGS

Thu Oct 15, 2020 3:06 pm

The only error I could spot on your config is this one.
From
/ip address
add address=192.168.1.1/24 comment=defconf interface=ether2 network=\
TO
/ip address
add address=192.168.1.1/24 comment=defconf interface=bridge network=\

Other than that I would check your cabling.
When I used a HEX I had no problems getting 600 up and down on my 1 gig connection. So its not the limiting factor here.

Who is online

Users browsing this forum: No registered users and 10 guests