Full noob here :)
Router is RB44011iGS+RM
My network looks the following:
Port 1: WAN
Port2 : pc
Port6-7: 2 TP Link APs (EAP245)
Port 10: management port
For now i am trying to set up VLANs on the APs based of the article here : viewtopic.php?f=13&t=143620&sid=476fc76 ... 95c185b028
I've created the 10, 20, 30 and 99 VLANs etc.
Ports 6 and 7 are the only trunk ports(as i need VLANS mostly for wireless for now)
Issue is I seem to get on VLAN 30 when the traffic gets tagged as such but the AP itself does not register on the network and I have no access to it. So i mean things technically work but I have no control of the AP :)
My suspicion was its because trunk traffic needs to get tagged so I added the untagged thing to my 99 VLAN for test purposes and removed the Firewall tagged checks, but that does not help.
To start with how are you supposed to do this, say have 4 VLANS on an AP and a trunk on the router, but still be able to get the AP itself to register on the network as well.
Thank you for your help everyone!!!