1. how can I upgrade R11-LTE firmware if I do not have an active and running configuration??
the output error of the command is: status: connection error
Write to email@example.com
and they can share you a firmware-file to do a upgrade procedure localy. I cannot share that because this is not public by MikroTik at first place.
Isn't the fw upgrade process only available if I am online??
No, you can a local, offline way, read more in documentation https://wiki.mikrotik.com/wiki/Manual:I ... re_upgrade
If I try to ping from LTE for example google's IP address 220.127.116.11
ping interface=ether1 address=18.104.22.168
ping interface=bridgeLocal address=22.214.171.124
? Those interfaces are LAN, not WAN. The LAN not have inside own broadcast domain adressation like 126.96.36.199.
You ping should be by:
ping 188.8.131.52 interface=lte1 # you have lte1 rename to LTE-4G but this 4G is not R11e-4G lte module but R11e-LTE6 and this interface wrong me :).
/interface lte apn set [ find default=yes ] apn=fwanat.tim.it name=TIM-FWA passthrough-interface=bridgeLocal passthrough-mac=00:00:00:00:00:00
/interface lte apn add apn=web.onmitel.it name=VODAFONE
/interface lte set [ find ] apn-profiles=VODAFONE band=1,3,7,20,8,2,38,40,41,39,5,12,17,25,26 name=LTE-4G
You not use default APN, good because this passthrough-interface=bridgeLocal is wrong....
name=LTE-4G use many bands, you can use !band or band="" to set default, means acrivate all insted of selecting all of them.
Now you use APN web.onmitel.it and probabli it's good, I hope, confirm at ISP.
Ask ISP if you are not LOCK with your SIM to your bungle lte device because maybe that's why this sim not work because your R11e-LTE6 have other IMEI then ISP allow.... maybe.
/interface detect-internet set detect-interface-list=WAN internet-interface-list=WAN lan-interface-list=LAN wan-interface-list=WAN
Please DISABLE detection of internet feature. You assign LTE-4G into WAN list staticly and this is proper.
/ip dhcp-client add comment=defconf disabled=no interface=bridgeLocal
/ip dhcp-server network add address=192.168.0.0/24 gateway=192.168.0.1 netmask=24
/ip dns set servers=184.108.40.206,220.127.116.11
dhcp client and server at the same interface... no logic
Maybe consider just easy steps.
And of course remember to add own user in Full group and remove/disable default admin user.
You do not have the required permissions to view the files attached to this post.