Hello

My WAN bandwidth is showing 10-15 mbps more than LAN interface bandwidth in my Mikrotik. I already have drop rule of dns from WAN port. But the problem is still. Difference between LAN and WAN port is more than 10 mbps. Anyone can help me to solve this issue.

Thank you

I would start with Tools->Torch: If that is not sufficient, you may also go to IP->Firewall->Connections: that should give you enough overview about your WAN connections. From there on, hard to say what you need to do - depends what kind of connections you find

I checked in details but i did not found anything
both things screenshot is attached you can also check. when i disabled lan all traffic is gone to normal and wan does not use any traffic but if i start olt (lan) traffic its goes up and difference is gone up.

Any one?

Do you have Queue for you "LAN" users?

Do you have Queue for you "LAN" users?

Yes and for pppoe its created automatically.

Still problem is there. i changed the ip as well but wan and lan difference is still there.

It’s because the queues..if you trying to remove dynamic queue Temporarily..and looking for the traffic between Wan and Lan ,You will find it equal

change queue packet 50 to 20000