Hello,
as a newbie Mikrotik user of hAP ac2, I have a question on monitoring the AP.
My setup: cable modem -> Router-A ->hAP-ac2. That is to say my use is that of an Access Point.
Because of cable operator restrictions, the Router-A operates in gateway mode.The hAP-ac2 works in bridge mode.
In Router-A access rights are granted by MAC-address.
WLAN clients' access to LAN is working fine. However, when I ping AP-ac2 from the LAN side, I get a time out error..
Router Address: 192.168.1.1 on subnet 255.255.255.0
In -> IP -> Routes there is
a route '192.168.88.0/24 bridge reachable'.and
a route '0.0.0.0/0 GW=192.168.1.1 unreachable'.
What do I have to do to ping and monitor using SNMP?
Thanks and best regards