Community discussions

MikroTik App
 
User avatar
Halfeez92
Member Candidate
Member Candidate
Topic Author
Posts: 101
Joined: Tue Oct 30, 2012 12:58 pm
Location: 127.0.0.1
Contact:

Distribute Public IP using EoIP

Sun Mar 28, 2021 8:07 am

Hi,

I am having difficulties on how to distribute a segment of public IPs using EoIP. Let say I have a /24 of public IPs and I want to distribute it to my remote site using EoIP and I want to make sure that public IP at remote site can be ping. I tried creating EoIP on both end and assigned it with public IP manually, but I got intermittent ping. Can someone help me on how to do it properly?
 
aesmith
Member Candidate
Member Candidate
Posts: 264
Joined: Wed Mar 27, 2019 6:43 pm

Re: Distribute Public IP using EoIP

Sun Mar 28, 2021 11:20 am

Personally I don't think I'd do it that way, unless your remote hosts really really need to have an Internet IP physically assigned to them. Instead, keep your subnet on your Internet router and use NAT to map the addresses to your remote hosts.
 
User avatar
donsergio
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Wed Jan 31, 2018 8:35 pm
Location: Spain

Re: Distribute Public IP using EoIP

Sun Mar 28, 2021 12:04 pm

I do this in my network, L2TP tunnels for each IP and NAT 1:1... It works really well
 
User avatar
Halfeez92
Member Candidate
Member Candidate
Topic Author
Posts: 101
Joined: Tue Oct 30, 2012 12:58 pm
Location: 127.0.0.1
Contact:

Re: Distribute Public IP using EoIP

Sun Mar 28, 2021 3:15 pm

I do this in my network, L2TP tunnels for each IP and NAT 1:1... It works really well
Can share your config? By the way I just want to map the public IP to the management on the remote site so I can remote it using the public IP assigned.
Let say my public IP is 1.1.1.10 on my CHR WAN interface, I want to put 1.1.1.20 on my remote site so I can use 1.1.1.20 to access winbox, webfig and etc.

Who is online

Users browsing this forum: 0xAA55, EmuAGR, ppawe and 55 guests