I have Network config DSL---->Mikrotik----->Lan/ESXi
Mikrotik connected with PPPoE out to modem and play rule of DHCP&DNS
Recently I added a pfSense VM playing a proxy rule With 1 WAN network with WPAD-PAC proxy configuration
Problem
Different devices having different ways of accessing the configuration files. Three of them are required due to different browsers using different filenames to obtain proxy configuration information.
But as you can see I cant Make an option Set for these 3 files as they use the same code, Am I doing it wrong, or is there a way to achieve an auto proxy config
Mikrotik DHCP
pfSense DHCP Reference
-----------------------------------------------------------------------------------------------
UPDATE
So I try to use NAT It didn't work as I attend too. But if I use my proxy server 192.168.88.10 as my DHCP gateway it will work as a transparent proxy will work. Still think WPAD is the way to go and waiting on a reply.
Code: Select all
add action=redirect chain=dstnat dst-port=80 protocol=tcp src-address=192.168.88.0/24 to-addresses=192.168.88.10 to-ports=3128
add action=redirect chain=dstnat dst-port=443 protocol=tcp src-address=192.168.88.0/24 to-addresses=192.168.88.10 to-ports=3129
UPDATE :(
As I was surfing the internet for solutions I found out I can force the proxy setting through the GPO.
Code: Select all
Mozilla Firefox
https://support.mozilla.org/en-US/kb/customizing-firefox-using-group-policy-windows
Google Chrome
https://support.google.com/chrome/a/answer/187202?hl=en