Hi, I have implemented PCC load balancing as explained in example 3 here: https://help.mikrotik.com/docs/display/ ... ll+Marking. I have swapped IP addresses and I am using interface bridge instead of ether3 as I use my RB4011iGS+ to directly connect my home appliances. The setup seems to be working from the bridge network and all connections are properly marked in the IP/Firewall/Connections list (except for those starting and terminating in the bridge address range).
I wanted to experiment with scripting/netwatch to disable unreachable routes, but unfortunately, it seems that I cannot ping 8.8.8.8 from the router itself. I get "no route to host" error. I have also noticed that WinBox shows IP->Routes->NextHops Gateway state "Unreachable". Ping from devices connected to the bridge interface works properly.
Any idea what is going on here? Is the tutorial missing some rules to handle this particular example, or I have misconfigured something?