Scheme attached:
Config:
Code: Select all
###Identity: RT-LH ###
/interface bridge
add bridge name=bridgeLSHN
/interface bridge port
add bridge=bridgeLSHN interface=sfp1 hw=yes
/interface ethernet switch vlan
add ports=sfp1 switch=switch1 vlan-id=1
add ports=sfp1 switch=switch1 vlan-id=300
/interface ethernet switch port
set sfp1 vlan-mode=secure vlan-header=add-if-missing
###Identity: SW-CAF ###
/interface bridge
add bridge name=bridgeLSHN
/interface bridge port
add bridge=bridgeLSHN interface=sfp1 hw=yes
add bridge=bridgeLSHN interface=ether1 hw=yes
/interface ethernet switch vlan
add ports=sfp1,ether1 switch=switch1 vlan-id=1
add ports=sfp1,ether1 switch=switch1 vlan-id=300
/interface ethernet switch port
set sfp1 vlan-mode=secure vlan-header=add-if-missing
set ether1 vlan-mode=secure vlan-header=add-if-missing
###Identity: SW-NOC ###
/interface bridge
add bridge name=bridgeLSHN
/interface bridge port
add bridge=bridgeLSHN interface=ether1 hw=yes
add bridge=bridgeLSHN interface=ether2 hw=yes
add bridge=bridgeLSHN interface=ether3 hw=yes
/interface ethernet switch vlan
add ports=ether1,ether2 switch=switch1 vlan-id=1
add ports=ether1,ether2 switch=switch1 vlan-id=300
add ports=ether2,ether3 switch=switch1 vlan-id=301
/interface ethernet switch port
set ether1 vlan-mode=secure vlan-header=add-if-missing
set ether2 vlan-mode=secure vlan-header=add-if-missing
set ether3 vlan-mode=secure vlan-header=always-strip default-vlan-id=301
###Identity: SW-FAV ###
/interface bridge
add bridge name=bridgeLSHN
/interface bridge port
add bridge=bridgeLSHN interface=ether1 hw=yes
add bridge=bridgeLSHN interface=ether2 hw=yes
add bridge=bridgeLSHN interface=ether3 hw=yes
/interface ethernet switch vlan
add ports=ether1,ether2 switch=switch1 vlan-id=1
add ports=ether2 switch=switch1 vlan-id=300
add ports=ether2,ether3 switch=switch1 vlan-id=301
/interface ethernet switch port
set ether1 vlan-mode=secure vlan-header=always-strip default-vlan-id=1
set ether2 vlan-mode=secure vlan-header=add-if-missing
set ether3 vlan-mode=secure vlan-header=always-strip default-vlan-id=301
If it is right! how can I reach from RT-LH all the mikrotik,60GHRadio,ptmp5GHz devices on 10.4.10.0/24 vlanid 1 and all the 10.4.11.0/23 vlanid 300 devices ?
I'm really not writing after half an our of testing I'm almost one week on this setup resetting and rebuilding everything from scratch.
Thanks for help!!