For some reason I can't get the queues to work.
I have set up a simple lab system - RB750G, firmware 6.45.3
ether 1, 2 and 3 are bridged as WAN,
ether 4 and 5 bridged as LAN (Not used).
ether1 connects to internet, ether 2 and 3 to two Dell PowerEdge systems.
allow-fast-path is set to no.
No firewall rules set
I've created a very simple queue, but no traffic flows though it. I've tried various targets (WAN, ether2, IP address of PowerEdge). Nothing seems to work.
What am i doing wrong?
queue simple print
Flags: X - disabled, I - invalid, D - dynamic
0 name="global" target=ether2 parent=none packet-marks="" priority=2/2 queue=default-small/default-small limit-at=10M/10M max-limit=10M/10M
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s bucket-size=0.1/0.1