Hi,
I currently have a setup like this:
Ether1 - IPMPLS Lan (Intercompany traffic)
Ether2 - LAN
Ether3 - Antenna (INTERNET)
All traffic from LAN(192.168.1.0/24) to Public IP in my Core are routed using Ether1.
I have done a Mangle as such:
- mark routing
- prerouting
- src addr (192.168.1.0/24)
- Destination Address List !LOCAL, LOCAL = 10.0.0.0/16, 172.16.0.0/16 and 192.168.0.0/16
Salespersons behind the LAN have an SSTP Client to the Public IP which gets routed using Ether1.
That is fine but when I do an SSTP Client to that Public IP in the Mikrotik it gets routed using Ether1, I would like it to be routed using Ether3.
Thank you !