Hello,
I'm attempting to use the default settings provided with the RB4011+ac, after updating to the latest rOS v7.1b6.
The "Quick Set" is as delivered: Home AP dual
When I see UPnP rules populate in NAT however, they all populate with 'in-interface=ether1'. Considering this port is disabled, removed, and unused, shouldn't this be sfp-sfpplus1?
I have plugged my WAN optical into the sfp-sfpplus1 interface, and:
DISABLED ether1 interface
REMOVED ether1 from bridge
SET UPnP interface to sfp-sfpplus1
Example:
/ip/upnp/interfaces/print
Columns: INTERFACE, TYPE
# INTERFACE TYPE
0 bridge internal
1 sfp-sfpplus1 external
/ip/firewall/nat/print
Flags: X - disabled, I - invalid; D - dynamic
0 ;;; defconf: masquerade
chain=srcnat action=masquerade out-interface-list=WAN
ipsec-policy=out,none
1 D ;;; upnp 192.168.88.252: uTorrent (TCP)
chain=dstnat action=dst-nat to-addresses=192.168.88.252 to-ports=32315
protocol=tcp dst-address=X.redacted.X.173 in-interface=ether1
dst-port=32315
2 D ;;; upnp 192.168.88.252: uTorrent (UDP)
chain=dstnat action=dst-nat to-addresses=192.168.88.252 to-ports=32315
protocol=udp dst-address=X.redacted.X.173 in-interface=ether1
dst-port=32315
Is this simply an error in labeling? Does ether1 somehow bridge with SFP and not update the name?
Curious how to properly set this up-
Thanks,
Wick