Community discussions

MikroTik App
 
RandomKappaUsr
newbie
Topic Author
Posts: 39
Joined: Thu Oct 15, 2020 8:51 pm

Queue List questions

Sat Jun 05, 2021 10:58 am

Hello,

so I have created a queue list to limit the guest network DL/UP speed.

However, numbers like 10M or even 1M resulted in speedtest.net results at my max speed (around 35 Mbps).

It only does something when I set Target to my guest bridge called "bridge-guest", or the address range it uses (192.168.99.0/24)
In the first case (target bridge) setting Max Limit to 128k, gives me 6-7 Mbps on the Speedtest.
In the second case (target 192.168.99.0/24) setting Max Limit to 64k, gives me 6-7 Mbps on the Speedtest.
Screenshot 2021-06-05 094949.png

My question is, isn't this weird? I would expect less than 8 Mbps speedtest from 64k limit :-D

Also attaching my configs.
[*]HAP-AC2 is main router
[*]HAP-Lite is for wifi extension and connecting my PC via cable

Thank you for any advice!
You do not have the required permissions to view the files attached to this post.
 
RandomKappaUsr
newbie
Topic Author
Posts: 39
Joined: Thu Oct 15, 2020 8:51 pm

Re: Queue List questions

Wed Jun 09, 2021 6:46 pm

Bump
 
2frogs
Forum Veteran
Forum Veteran
Posts: 713
Joined: Fri Dec 03, 2010 1:38 am

Re: Queue List questions

Wed Jun 09, 2021 10:22 pm

You need to disable fast-track found in IP>Firewall>Filter or at least exclude your guest-lan from it.
 
RandomKappaUsr
newbie
Topic Author
Posts: 39
Joined: Thu Oct 15, 2020 8:51 pm

Re: Queue List questions

Thu Jun 10, 2021 7:10 pm

You need to disable fast-track found in IP>Firewall>Filter or at least exclude your guest-lan from it.
hello good man, thank you for your advice.

are there any negatives in doing so?

Who is online

Users browsing this forum: mtkvvv, PBondurant, valeb and 48 guests