I have a basic question regarding setting up RouterOS to connect to my ISP statically.
I was provided with this configuration data:
Code: Select all
WAN: 2a02:768:xxxx::ffff:10.13.11.86
GW: 2a02:768:xxxx::1
Prefix: 2a02:768:yyyy::/64
Code: Select all
/ipv6 address> print
Flags: X - disabled, I - invalid, D - dynamic, G - global, L - link-local
# ADDRESS FROM-POOL INTERFACE ADVERTISE
1 G 2a02:768:yyyy::1/64 bridge no
2 DL fe80::a55:31ff:fe1e:3c22/64 bridge no
3 DL fe80::a55:31ff:fe1e:3c21/64 ether1-WAN no
/ipv6 route> p
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, o - ospf, b - bgp, U - unreachable
# DST-ADDRESS GATEWAY DISTANCE
0 S ::/0 2a02:768:xxxx::1 1
1 ADC 2a02:768:yyyy::/64 bridge 0
I also have a server, and I'm able to ping the gateway 2a02:768:xxxx::1 without problems, but I'm unable to ping my Mikrotik or out of it ("no route to host").
thank you for any pointers!