I have a Groove (RouterBOARD Groove GA-52HPacn) accessing remote access points, talking to an RouterBOARD 962UiGS-5HacT2HnT. The RB then provides wireless and wired access to the internet for my devices.
When my Groove is connected to an access point, I would like to access the RB and the systems behind it from elsewhere on the WAN using Windows (primarily).
I tried following tutorials on setting up VPN Access name and password, setting up the PPP Profile on the RB. But, I could not get the Windows VPN to connect; using the VPN address, VPN User and VPN Password. The Windows VPN will not connect.
Can someone point me to the proper direction?
Thanks,
mark