Greetings you beautiful souls,
I am a happy owner of HAP AC2. Until recent storm, during which a lightning has burned off my ISP's switch. After they provided new one for my block, my Internet speed dropped down from 100mbit to 10 mbit.
I figured out that my ether1-wan port may have been damaged, so I switched WAN to ether3 -> removed ether3 from bridge, set up dhcp-client on ether3. It works fine with full speed.
I wanted to check how ether1 will behave on LAN, but I cannot connect to it. I have added it to the bridge and checked that none of the firewall rules have static 'ether1' set up.
My routing knowledge is not vast, so I would like to ask you for help.
Cheers,
hvltaj