Here is what I am trying to accomplish:
- Interfaces 2-8 will become an extension of my home network (not lab) and I need them to receive DHCP addresses from the WAN Router connected to Interface 1.
- My home network does not use VLAN's as the router that most of them connect to does not support that
- The other interfaces from this switch use a single bridge and all static IP's and VLAN's.
Below is a copy of my current configuration and I can supply a high level diagram if that helps. I posted a very similar question on a reddit subgroup for Mikrotik and I could not figure out all components based on the response.
Link to reddit post https://www.reddit.com/r/mikrotik/comme ... _question/ which has the very high level diagram in it.
Code: Select all
/interface bridge
add name=bridge vlan-filtering=yes
/interface ethernet
set [ find default-name=ether1 ] name=ether1-wan-dhcp-client
set [ find default-name=ether18 ] l2mtu=9216 mtu=9216
set [ find default-name=sfp-sfpplus1 ] l2mtu=9216 mtu=9216
set [ find default-name=sfp-sfpplus2 ] l2mtu=9216 mtu=9216
/interface vlan
add interface=bridge name=vlan10 vlan-id=10
add interface=bridge name=vlan11-vMotion vlan-id=11
add interface=bridge name=vlan12-vsan vlan-id=12
add interface=bridge name=vlan14-vxlan vlan-id=14
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether9 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether10 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether11 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether12 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether13 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether14 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether15 pvid=10
add bridge=bridge comment=defconf frame-types=\
admit-only-untagged-and-priority-tagged ingress-filtering=yes interface=\
ether16 pvid=10
add bridge=bridge comment=defconf interface=ether17
add bridge=bridge comment=defconf interface=ether18
add bridge=bridge comment=defconf interface=ether19
add bridge=bridge comment=defconf interface=ether20
add bridge=bridge comment=defconf interface=ether21
add bridge=bridge comment=defconf interface=ether22
add bridge=bridge comment=defconf interface=ether23
add bridge=bridge comment=defconf interface=ether24
add bridge=bridge comment=defconf interface=sfp-sfpplus1
add bridge=bridge comment=defconf interface=sfp-sfpplus2
/interface bridge vlan
add bridge=bridge tagged="ether17,ether18,ether19,ether20,ether21,ether22,ethe\
r23,ether24,sfp-sfpplus1,sfp-sfpplus2,bridge" vlan-ids=10
add bridge=bridge tagged="ether17,ether18,ether19,ether20,ether21,ether22,ethe\
r23,ether24,sfp-sfpplus1,sfp-sfpplus2,bridge" vlan-ids=11
add bridge=bridge tagged="ether17,ether18,ether19,ether20,ether21,ether22,ethe\
r23,ether24,sfp-sfpplus1,sfp-sfpplus2,bridge" vlan-ids=12
add bridge=bridge tagged="ether17,ether18,ether19,ether20,ether21,ether22,ethe\
r23,ether24,sfp-sfpplus1,sfp-sfpplus2,bridge" vlan-ids=14
/interface detect-internet
set detect-interface-list=all internet-interface-list=all lan-interface-list=\
all wan-interface-list=all
/ip address
add address=192.168.x.1/24 interface=vlan10 network=192.168.x.0
add address=192.168.x.1/24 interface=vlan11-vMotion network=192.168.x.0
add address=192.168.x.1/24 interface=vlan12-vsan network=192.168.x.0
add address=192.168.x.1/24 interface=vlan14-vxlan network=192.168.x.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=\
ether1-wan-dhcp-client
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1-wan-dhcp-client
/system clock
set time-zone-name=America/Los_Angeles
/system routerboard settings
set boot-os=router-os