Hello guys,
I'm struggling with something that should be easy but I can't find a solution:
I have a RB2011 which works as a captive portal / firewall router for a customer. I have to setup a new IP camera for surveillance, using the existing infrastructure. Actually I have the ISP router connected to a normal switch, providing free internet access for the administrative office PCs on the 192.168.5.0/24 lan, the same where my network video recorder resides. Attached to this I have my RB2011 (on ETH1 as WAN). On ETH5 I have the network switches and AP (all Unifi) that provide wireless internet for guests through a customized Mikrotik captive portal (10.2.0.0/24 network), and I have to install a new IP camera behind this. I already have set the camera MAC address to be allowed passtrough the firewall (like the unifi APs and switches so they can connect to my controller on the cloud), but I can't make the camera communicate with the QNAP NAS NVR that is connected "WAN" side.
Can you help me please?