Community discussions

MikroTik App
 
luckystarr90
just joined
Topic Author
Posts: 1
Joined: Fri Jul 23, 2021 7:57 pm

RB3011 Out of Band MGMT Port

Fri Jul 23, 2021 8:08 pm

Good Evening,
I'm new to mikrotik and I wanted to setup an interface port on my RB3011 to act as an out of band Interface.
What I want to achieve is to use an Interface (Let's say eth10) as a management interface completely separated from the main router logic.
Here is my network:
Eth1: Wan:(IP 100.100.100.100/29)
Eth6: Lan:(IP 192.168.88.1/24)
Eth10:Mgmt:(IP 192.168.10.10/24)

What I did:
1) remove eth10 from the default bridge and made another bridge (bridge2) with this only interface
2) created an input chain firewall rule to permit winbox management on this interface
Until this point everything works fine
Then I have to specify a gw for eth10, so I created a separate vrf (mgmt-vrf)
As soon as I assign eth10 to mgmt-vrf I loose winbox on this interface.
I also tried to speficy vrf on firewall policy I created at point 2, but nothing changes.
If I log firewall policy I see Syn packets coming from my pc attached to eth10, but no syn-ack coming back.

What am I doing wrong?

Thanks in advance.

Cristiano

Who is online

Users browsing this forum: Google [Bot] and 46 guests