Community discussions

MikroTik App
 
wetanoox
just joined
Topic Author
Posts: 12
Joined: Thu Jul 15, 2021 5:53 pm

Subnet issues

Sun Jul 25, 2021 7:34 pm

Hey,

following my network configuration (I hope it's clear enough).
Image

I would like to reach the devices connected to the MULTI (it's a mikrotik hap ac) network - 192.168.88.0/24 - from the clients on 10.0.0.0/24.

Is it possible?

At the moment i can reach the raspberry at 10.0.0.137 from the raspberry at 192.168.88.137, but it 's impossible otherwise.
 
User avatar
xvo
Forum Guru
Forum Guru
Posts: 1237
Joined: Sat Mar 03, 2018 1:12 am
Location: Moscow, Russia

Re: Subnet issues

Sun Jul 25, 2021 8:17 pm

You need to add a route to 192.168.88.0/24 on your main router with 10.0.0.100 as a gateway and disable NAT (masquerade) on mikrotik.
 
wetanoox
just joined
Topic Author
Posts: 12
Joined: Thu Jul 15, 2021 5:53 pm

Re: Subnet issues

Sun Jul 25, 2021 8:58 pm

You need to add a route to 192.168.88.0/24 on your main router with 10.0.0.100 as a gateway and disable NAT (masquerade) on mikrotik.
Thanks @xvo for the reply.

The problem is that the my main router is a modem provided by the ISP and i can add almost anything on it. It's a stupid custom firmware which doesn't let me add a new route.

Any workaround ideas?
 
User avatar
xvo
Forum Guru
Forum Guru
Posts: 1237
Joined: Sat Mar 03, 2018 1:12 am
Location: Moscow, Russia

Re: Subnet issues

Sun Jul 25, 2021 10:09 pm

which doesn't let me add a new route
Are you sure about that?
Pretty basic stuff that even most of the dumbest ISP boxes are capable of.

But if your's really can't these options come to mind:
- you can flatten your network by making mikrotik work as switch + wifi AP: all devices will get IP's from the main router;
- you can perform dst-nat on mikrotik for needed services just the same way you do it to access you home network from outside; of course with same limitations;
- or alternatively you can purchase another fully functional router to serve as you main one and either ditch the ISP's box at once or ask them to put it the bridge mode.
 
User avatar
jvanhambelgium
Forum Veteran
Forum Veteran
Posts: 985
Joined: Thu Jul 14, 2016 9:29 pm
Location: Belgium

Re: Subnet issues

Sun Jul 25, 2021 11:16 pm

But aren't all your devices already in the 10.0.0.x network ? What subnet-mask is issued from the top router ? (I guess a /24 ?)
Chances are the top device works like an AP, so it provides IP's to your devices, but you can communicate freely with devices on the LAN-ports of the ISP-router.

The way you draw it, it looks like your ISP device has some LAN-ports and from there you go via PtP to the Mikrotik.

So basically add a static route pointing to 192.168.88.0/24 with a next-hop of 10.0.0.100

Don't see why that would not work, UNLESS the wireless portion of your ISP-router is strictly separated somehow.
 
wetanoox
just joined
Topic Author
Posts: 12
Joined: Thu Jul 15, 2021 5:53 pm

Re: Subnet issues

Fri Aug 13, 2021 4:13 pm

which doesn't let me add a new route
Are you sure about that?
Pretty basic stuff that even most of the dumbest ISP boxes are capable of.
Unfortunately, now I'm sure that i cannot.
But if your's really can't these options come to mind:
- you can flatten your network by making mikrotik work as switch + wifi AP: all devices will get IP's from the main router;
This seems to be the best solution in this case. Now the only problem is to configure the RB as you suggested :?

Who is online

Users browsing this forum: Bing [Bot] and 53 guests