My English is not well, please forgive my grammatical error.
I bought a hap ac2 and configured pppoe client on ether1 port. However, it is very slow to access the network and sometimes even lose the connection.
Using ip dns cache print, I found that the dns cache is very slow, and it takes about 10 seconds to receive a response.
This problem occurs when using peer dns, but when i set public dns works normally.
So I tried to manually set isp dns on my computer, and it worked normally.It does not seem to be a problem with isp dns.
After reconfiguration and netinstall my router, this problem is still unresolved.
I tried to use other routers, and there is no such problem.
Here is my configuration
Code: Select all
/interface bridge
add admin-mac=******* auto-mac=no comment=defconf name=bridge
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 \
use-peer-dns=yes user=******
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce \
country=china disabled=no distance=indoors frequency=auto installation=\
indoor mode=ap-bridge ssid=Free_use wds-default-bridge=bridge wds-mode=\
dynamic-mesh wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\
20/40/80mhz-Ceee country=china disabled=no distance=indoors frequency=\
auto installation=indoor mode=ap-bridge ssid=Free_use wds-default-bridge=\
bridge wds-mode=dynamic-mesh wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=default-dhcp ranges=10.10.10.1-10.10.10.200
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=pppoe-out1 list=WAN
/ip address
add address=10.10.10.251/24 comment=defconf interface=bridge network=\
10.10.10.0
/ip cloud
set update-time=no
/ip dhcp-server network
add address=10.10.10.0/24 comment=defconf gateway=10.10.10.251
/ip dns
set allow-remote-requests=yes cache-size=4096KiB
/ip dns static
add address=10.10.10.251 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system clock
set time-zone-name=Asia/Shanghai
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN