Hi,
I am new to Router OS, and I need your guidance on how to configure a MikroTik Router (using Winbox) to connect PC with a dynamic address to an iot device configured with a static ip. I have an esp32 iot device which received its static IP (192.168.0.250) via the arduino bootstrapper so the gateway could not be provided. It is connected to the network via the wlan2 interface.
I would like to ping this device from my PC connected to the ether3 LAN interface. It has the 192.168.0.55 IP assigned by the DHCP server and it was made static.
wlan2 and ether3 are both under the same bridge. I have a dhcp address pool configured to 192.168.0.2-192.168.0.249 in order to avoid collisions. The dhcp with the address pool is configured to the LAN bridge.
In my understanding the PC should be able to see the esp32 since they are in the same subnet. What am I missing?
Thank you for your help, much appreciated.
Andras