We need more !
Please Send Config (/export hide-sensitive)
I was send picture with all config. All setting are visable on PICS.
But here is export, send me command if this is not full. Im start LEARN this device.
Config ::
/interface bridge
add name=bridge_LAN
/interface ethernet
set [ find default-name=ether2 ] comment="Siec LAN" name=LAN
set [ find default-name=ether1 ] comment=Internet name=WAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool1 ranges=192.168.10.2-192.168.10.254
add name=dhcp_pool2 ranges=192.168.10.2-192.168.10.254
/ip dhcp-server
add address-pool=dhcp_pool2 disabled=no interface=bridge_LAN name=dhcp1
/interface bridge port
add bridge=bridge_LAN interface=LAN
add bridge=bridge_LAN interface=ether3
add bridge=bridge_LAN interface=ether4
add bridge=bridge_LAN interface=ether5
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=192.168.0.88/24 comment="Port z Internetem" interface=WAN \
network=192.168.0.0
add address=192.168.10.1/24 comment="Siec LAN" interface=bridge_LAN network=\
192.168.10.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-client
add interface=WAN
/ip dhcp-server network
add address=192.168.10.0/24 gateway=192.168.10.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip firewall nat
add action=masquerade chain=srcnat out-interface=WAN
/ip route
add distance=1 gateway=192.168.0.1
/system clock
set time-zone-name=Europe/Warsaw
/system identity
set name=MikroC
/system ntp client
set enabled=yes primary-ntp=162.159.200.1 secondary-ntp=162.159.200.123
The next time I go to the technician about TV problems, I'll bring him a photo of the remote.
Im not stupid. I was SEND PICTURE with all config in first POST. If u can't read this picture so probbly u cant help me! This is sample config like on many wideo::
https://www.youtube.com/watch?v=ZOvRv0oDFMI