Hello everyone.
I am new to Mikrotik and need some advice in terms of technical feasibility.
I have to restructure my home network. My home office will move from the ground floor down to the basement. The difficulty is that I can only run one single fiber cable between both areas. Also, the place of the handover point for the internet access cannot be changed.
The plan is to use the current FRITZBOX as the 'provider router' and as a DECT PBX. WiFi will be completely disabled on the FRITZBOX.
The additional networks including WiFi will be 'hidden' behind a RB4011. Various VLANs will run on a CRS326. The VLANs will be trunked to the RB4011.
I have attached a simple sketch of what is planned.
Is it technically possible to have et10 on the RB4011 configured as an access port for VLAN30?
I shall be most grateful if someone could advise accordingly.