I need some help:
My setup:
ether1: WAN port with static IP: 172.16.20.11/24 DHCP server address:172.16.0.2 DNS server address: 172.16.0.9
wlan0: 192.168.88.0/24 with DHCP server
ether3: I want to forward all traffic from this port to WAN(ether1) --->this works fine!
My problem is that my wifi clients get IP from 192.168.88.0/24 range but no internet access.
Thank you for all the help!
Code: Select all
admin@MikroTik-AP1] > /export hide-sensitive
# aug/08/2021 10:58:33 by RouterOS 6.48.3
# software id = 8UTZ-Y547
#
# model = CRS109-8G-1S-2HnD
# serial number = 883C07E37159
/interface bridge
add name=bridge1
add admin-mac=64:D1:54:B3:C7:AF auto-mac=no comment=defconf name=bridge2
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX country=hungary disabled=no frequency=auto mode=ap-bridge ssid=ap1 wps-mode=disabled
/interface ethernet
set [ find default-name=ether2 ] disabled=yes
set [ find default-name=ether4 ] disabled=yes
set [ find default-name=ether5 ] disabled=yes
set [ find default-name=ether6 ] disabled=yes
set [ find default-name=ether7 ] disabled=yes
set [ find default-name=ether8 ] disabled=yes
set [ find default-name=sfp1 ] disabled=yes
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge2 name=defconf
/interface bridge port
add bridge=bridge1 comment=defconf interface=ether3
add bridge=bridge2 comment=defconf interface=wlan1
add bridge=bridge1 interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge2 list=LAN
add comment=defconf interface=bridge1 list=WAN
/ip address
add address=172.16.20.11/16 interface=ether1 network=172.16.0.0
add address=192.168.88.0/24 interface=bridge2 network=192.168.88.0
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1 netmask=24
/ip dns
set allow-remote-requests=yes servers=172.16.0.9
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid disabled=yes
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" disabled=yes in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid disabled=yes
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new disabled=yes in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN