Hi ,
I have a hEX RB750 Gr3.
I have try to configure inter-vlan routing following the guideline mentioned here under the example - "VLAN Example - InterVLAN Routing by Bridge"
https://help.mikrotik.com/docs/display/ ... ngbyBridge
But the ping between different vlan is still not working ? Any idea what could be the reason ?
Some config from my device
/interface bridge
........... comment=defconf name=bridge \
vlan-filtering=yes
/interface vlan
add interface=bridge name=vlan10 vlan-id=10
add interface=bridge name=vlan20 vlan-id=20
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3 pvid=20
add bridge=bridge comment=defconf interface=ether4 pvid=10
add bridge=bridge comment=defconf interface=ether5 pvid=10
/interface bridge vlan
add bridge=bridge tagged=bridge untagged=ether4,ether5 vlan-ids=10
add bridge=bridge tagged=bridge untagged=ether3 vlan-ids=20
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether2 network=\
192.168.88.0
add address=192.168.2.20/24 interface=vlan10 network=192.168.2.0
add address=192.168.3.20/24 interface=vlan20 network=192.168.3.0
I did not do anything on the firewall, it is as per default.
Appreciate anyone advice. TQ