Community discussions

MikroTik App
 
alexgray
just joined
Topic Author
Posts: 3
Joined: Tue Aug 31, 2021 6:56 pm

Configuring combined bridge/router

Tue Aug 31, 2021 7:10 pm

I'd be grateful for an outline of how to configure an RB4011 (or similar) router for the following scenario:

WAN interface to an ISP providing 5 static IPs.

Four of the IP addresses each bridged to its own dedicated downstream router (so each of four downstream routers gets a public IP address),
plus routing between the router interfaces so that inter-router traffic is routed back by the Mikrotik directly to the relevant downstream router rather than going out to the ISP router and back.

This is so that four different premises belonging to related businesses may share one high-speed internet connection each with their own public IP address, but at the same avoiding sending traffic passing among themselves up and down the WAN pipe.

Thanks for any guidance.

Who is online

Users browsing this forum: No registered users and 49 guests