Hi, I have a hEX S device at home with ether1 connected to ONT WAN Port with Static IP. ether2 is connected to a WiFi access point (Not Mikrotik brand) that is in bridge mode. the AP operates in both 2.4 and 5Ghz channels. ether3 to ether5 connected to a switch and some hard wired devices like PCs, TVs. on the 2.4Ghz channels there are some IoT devices like cameras and bells etc. connect today which gets the IP address from hEX S.
What I would ideally like to do is, create a MAC bases VLAN so all my TVs, Cameras, IoTs go in to VLAN1 and any new devices etc. that are not matching the MAC list should go to VLAN2. is this something achievable with hEX S? I see the device doesn't support vlan table which I am not sure is required to achieve this.
I have read thru this article and got some insights but hoping someone can help me with a similar .rsc file for the MAC VLAN or provide some guidance.
viewtopic.php?t=143620
thanks in advance,
RK