i have a microtick attached to a internet line in ether1 and all users in network use that as their gateway.
every setting was established by mikrotik default script
now i want to use the second internet access at ether10 with valid ip address and use that address for connection to my internal server
the connection was successful and now i can see the microtik router from the outside with ip
i used this nat :
/ip firewall nat add chain=dstnat action=dst-nat dst-address=85.133.86.8 dst-port=22 to-addresses=172.22.66.10 protocol=tcp
but is not working
and i dont know why