The screenshot you posted does not tell enough of story. Post full config in text: execute /export hide-sensitive file=anynameyouwish inside terminal window, fetch resulting file, open it using text editor and copy-paste contents here ... inside [code] [/code] environment. Before copy-paste check if there's still some sensitive information shown (such as WiFi passwords, public IP addresses, ...) and obfuscate that information (don't just leave it out or else we'll have a blind spot again).
Hi mkx,
Here you have the output:
/interface bridge
add admin-mac=08:55:31:9D:BF:74 auto-mac=no comment=defconf name=bridge
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 \
use-peer-dns=yes user=
/interface ethernet switch port
set 0 default-vlan-id=0
set 1 default-vlan-id=0
set 2 default-vlan-id=0
set 3 default-vlan-id=0
set 4 default-vlan-id=0
set 5 default-vlan-id=0
set 6 default-vlan-id=0
set 7 default-vlan-id=0
set 8 default-vlan-id=0
set 9 default-vlan-id=0
set 10 default-vlan-id=0
set 11 default-vlan-id=0
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip ipsec profile
set [ find default=yes ] dh-group=modp2048 enc-algorithm=aes-256 \
hash-algorithm=sha256
/ip ipsec proposal
set [ find default=yes ] auth-algorithms=sha256 enc-algorithms=aes-256-cbc
/ip pool
add name=dhcp ranges=192.168.2.60-192.168.2.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=ether6
add bridge=bridge comment=defconf interface=ether7
add bridge=bridge comment=defconf interface=ether8
add bridge=bridge comment=defconf interface=ether9
add bridge=bridge comment=defconf interface=ether10
add bridge=bridge comment=defconf interface=sfp-sfpplus1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=pppoe-out1 list=WAN
/ip address
add address=192.168.2.1/24 comment=defconf interface=bridge network=\
192.168.2.0
add address=172.16.0.1/30 interface=Cloud network=172.16.0.0
add address=172.18.0.1/30 interface=Plenita network=172.18.0.0
add address=172.19.0.1/30 interface="Mihai Popa - UK" network=172.19.0.0
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server network
add address=192.168.2.0/24 comment=defconf gateway=192.168.2.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.2.1 comment=defconf name=router.lan
/ip firewall address-list
add address=192.168.1.0/24 list=IPSECDST
add address=192.168.3.0/24 list=IPSECDST
add address=192.168.32.0/24 list=IPSECDST
add address=192.168.2.0/24 list=IPSECSOURCE
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment=SSH dst-port=22 protocol=tcp \
to-addresses=192.168.2.10 to-ports=22
add action=dst-nat chain=dstnat comment=Wireguard dst-port=41194 protocol=udp \
to-addresses=192.168.2.10 to-ports=41194
/ip firewall service-port
set irc disabled=yes
set sip disabled=yes
/ip route
add distance=1 dst-address=192.168.1.0/24 gateway=172.18.0.2
add distance=1 dst-address=192.168.3.0/24 gateway=172.16.0.2
add distance=1 dst-address=192.168.32.0/24 gateway=172.19.0.2
/system clock
set time-zone-name=Europe/Bucharest
/system identity
set name=office.bisar.ro
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN