I want to access everything in my LAN (10.0.0.1/24), while using my phone and Wireguard.
I get the ip address 10.0.10.10 on my phone while using wg.
I have the connection working, and I can access docker containers on my home server, but I can't access the router (10.0.0.1) it self.
How can I fix this issue?
Code: Select all
0 D ;;; special dummy rule to show fasttrack counters
chain=forward action=passthrough
1 ;;; defconf: accept established,related,untracked
chain=input action=accept connection-state=established,related,untracked
2 ;;; WireguardDrosken
chain=input action=accept protocol=udp in-interface-list=WAN dst-port=13231 log=no log-prefix=""
3 ;;; defconf: drop invalid
chain=input action=drop connection-state=invalid
4 ;;; defconf: accept ICMP
chain=input action=accept protocol=icmp
5 ;;; defconf: accept to local loopback (for CAPsMAN)
chain=input action=accept dst-address=127.0.0.1
6 ;;; defconf: drop all not coming from LAN
chain=input action=drop in-interface-list=!LAN
7 ;;; defconf: accept in ipsec policy
chain=forward action=accept ipsec-policy=in,ipsec
8 ;;; defconf: accept out ipsec policy
chain=forward action=accept ipsec-policy=out,ipsec
9 ;;; defconf: fasttrack
chain=forward action=fasttrack-connection hw-offload=yes connection-state=established,related
10 ;;; defconf: accept established,related, untracked
chain=forward action=accept connection-state=established,related,untracked
11 ;;; defconf: drop invalid
chain=forward action=drop connection-state=invalid
12 ;;; defconf: drop all from WAN not DSTNATed
chain=forward action=drop connection-state=new connection-nat-state=!dstnat in-interface-list=WAN