Need your help with first connection to hEX-S
I just got my new hEX-S. I kept the default configurations, and only changed the WAN to use SFP1 port (instead of Ether1), changed the default DCHP, and configured the pppoe user/pass connection from my ISP.
In WinBox I see that the pppoe is connected, but there is no internet access on Ether2 port.
What did I miss doing???
Here are the exported configuration:
Code: Select all
# jan/02/1970 02:25:47 by RouterOS 6.48.6
# software id = ZBI2-PFFY
#
# model = RB760iGS
# serial number = HE808NV4JJN
/interface bridge
add admin-mac=48:A9:8A:87:72:D3 auto-mac=no comment=defconf name=bridge
/interface pppoe-client
add add-default-route=yes disabled=no interface=sfp1 name=pppoe-out1 \
use-peer-dns=yes user=b1000@201947343
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.101.3-192.168.101.199
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf disabled=yes interface=sfp1
add bridge=bridge interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add interface=pppoe-out1 list=WAN
add interface=sfp1 list=WAN
/ip address
add address=192.168.101.1/24 comment=defconf interface=bridge network=\
192.168.101.0
/ip dhcp-client
add interface=sfp1
/ip dhcp-server network
add address=192.168.101.0/24 comment=defconf gateway=192.168.101.1 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.101.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/system identity
set name=RouterOS
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN