I have some problems I can not use some commands. E.g. mark-flow= it does not work
Mikrotik says no such argument (mark flow) why is this? Allso fllow= it does not work

[admin@MikroTik] ip firewall mangle> add action=passthrough mark-flow=myusers
no such argument (mark-flow)
[admin@MikroTik] ip firewall mangle>

Can I use other commands in this case

admin@MikroTik] ip firewall mangle> add action=passthrough mark-flow=myusers
no such argument (mark-flow).

It is very clear that there is NO such command like "Mark-flow"

In which cases I can user them I saw them in manual I wanted to limit traffic for all P2P, for my PPPoE users. How can I configure rules to limit traffice e.g. up/down 10k/10k. My clients have ip in ranges 10.0.0.10-10.0.0.200
Public interface IP 192.168.40.2
Local interface no IP
How I can limit transfer rate for PPPoE users, and if I want to allow any to have more traffic for P2P e.g. for this user(user1) its IP 10.0.0.10
Local IP for all my PPPoE clients 10.0.0.1 and remote ip pooll 10.0.0.10-10.0.0.200