Hi guys! im new in the world of Mikrotik
Right now i have a routerboard 133c with a mini-pci wireless Atheros and one port ethernet connected to an switch.
Also in the Switch i have a modem/router Zyxel (in router mode) (gateway 192.168.1.1).
I have a PC with a wifi pci card, i can connect to my atheros ap-brigde but i dont have internet.
So, i think i need help with DHCP Server, and a bridge to get internet from 192.168.1.1.

If firewall and NAT is handled by your Zyxel router and you just need a Bridged AP, then it is very easy.

You do not need to define any addresses or routes. Just create a bridge and put ether1 and the vlan1 into this brigde like shown in

http://forum.mikrotik.com/viewtopic.php?f=13&t=34476

rgs Pilgrim

PS. Your Zyxel will act as the DHCP server and DHCP request / leases will just be passed through the mikoritk bridge.

Very graphic illustration. Nice.

And i think pilgrim meant wlan1 not vlan1

Just create a bridge and put ether1 and the vlan1 into this brigde

thanks so much to both
all is working now, except the winbox, it disconnects after a minute or seconds ¬¬, i hate u winbox!
btw im happy now