I have boards since 1 month;
First I tried 411U boards with HP's UN2400 ( Qualcaomm Gobi1000) but that 3G module doesn't support .
after I bought Sierra Wireless MC8790 and it worked, board can attached 3G network and take IP.
There is not any error because there is not any fault. 3G card and 411U can attached 3G network successfuly.
but but but 3G provider is giving same gateway IP with attached IP , can it make problem?
[admin@MikroTik] > ip route pr
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 DS 0.0.0.0/0 18.104.22.168 1
1 ADC 22.214.171.124/32 126.96.36.199 ppp-out1 0
2 ADC 192.168.1.0/24 192.168.1.1 ether1 0
I have masquerade;
[admin@MikroTik] > ip firewall nat pr
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade out-interface=ppp-out1
I send a lot message to forum and answers didn't solve my problem.
I have Ticket#2010021166000511 as well.