Community discussions

MikroTik App
 
zgi
newbie
Topic Author
Posts: 37
Joined: Thu Oct 22, 2009 7:07 pm

RB750 beginner questions

Thu Oct 22, 2009 7:23 pm

HI!

I intend to buy RB750 for start, to get familiar on routerboards. And my first question is, if this model or. routerOS supports PPPoE server, or only PPPoE client.

I would like to do a small network, on wich every one connected on this network, will have to connect to internet using PPPoE protocol.

Thank You!
 
fewi
Forum Guru
Forum Guru
Posts: 7717
Joined: Tue Aug 11, 2009 3:19 am

Re: RB750 beginner questions

Thu Oct 22, 2009 7:31 pm

It supports PPPoE servers.

RouterOS functionality is determined by license level. When you purchase an RB750, it comes with a specific license level, and you can upgrade it to higher license levels.

http://wiki.mikrotik.com/wiki/All_about_licenses

And here the differences between license levels: http://wiki.mikrotik.com/wiki/License_levels
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB750 beginner questions

Fri Oct 23, 2009 9:49 am

correction, it supports both PPPoE server _and_ client. If you want a bigger server, you will need to buy a Level5 or 6 license for it additionally to the router's cost!
 
zgi
newbie
Topic Author
Posts: 37
Joined: Thu Oct 22, 2009 7:07 pm

Re: RB750 beginner questions

Fri Oct 23, 2009 2:21 pm

I think that, L4 with 200 possible PPPoE tunnels will be enough.

Thank you both, for replies
 
nwabuzik
just joined
Posts: 1
Joined: Thu Dec 03, 2009 12:47 pm

Re: RB750 beginner questions

Thu Dec 03, 2009 12:54 pm

Please Some help meI want to configure this

Moderm(ISP) to....RB750 to .....AP(WIRELESS)......
I want the RB750 TO DO BOTH USER MANAGER AND HOTSPOT

my ISP IP ADD IS ......
62.56.159.186
255.255.255.248
62.56.159.185

81.199.3.4
81.199.3.18

PLEASE SOMEONE HELP ME THANKS
 
Red0ktober
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Fri Jun 26, 2009 8:42 pm

Re: RB750 beginner questions

Mon Dec 07, 2009 10:20 pm

Similar to what I did. I'm not working 100% yet, but getting there. Though I'm posting this over PPPoE on my bench test RB450G pppoe server, authenticating to a RB1000U w/ user manager.

Log in with serial and run the setup, that is the easy way to get your IP in there. Then log in with winbox and add the ppp and user manager packages.

If you're doing NAT, you'll have to set that up, I've never done it...

http://wiki.mikrotik.com/wiki/NAT_Tutorial

Then PPPoE and User Manager:

http://wiki.mikrotik.com/wiki/User_Manager/PPP_Example

Who is online

Users browsing this forum: Ahrefs [Bot], cmmike, donmunyak, hatred, jamesperks and 41 guests