Hi All
i have mikrotik RB133 ,want to use it as station mode and connect to Thomson speedtouch wireless modem ip address 192.168.1.254 (distance 500 meters) to extend the range . after spending 2-3 hours discovering rb133 and reading the manual , i succeeded at connecting to the Thomson modem using my laptop and going online , browsing , downloading , it's all perfect . and this is the method i have used :
assign ip address 192.168.100.1 to ether1 , enable wireless wlan1 and scan for the wireless SSID then connect in station mode , create bridge1 , and bridge ports ether1 and wlan1 , then dhcp client for wlan1 . DNS remotely checked , firewall with nat enabled chain=srcnat action=masquerade, and i failed to get the internet until i have changed the mode to station pseudobridge clone .
Now, the problem that i have, when connecting the cable that comes from RB133 to the wan port at linksys wrt54GL ,not being able to use it as wireless access point and couldn't get dhcp ip address from the Thomson router,also i have added dhcp server like it is explained at the mikrotik doc examples , and also failed .
Can any of you Admin gentlemen guide me what i have to do to get ip from dhcp server .