Community discussions

MikroTik App
 
someuser
Member Candidate
Member Candidate
Topic Author
Posts: 102
Joined: Tue Apr 13, 2010 7:05 am

How to add hotspot segment

Tue Jul 06, 2010 6:19 am

I have an existing hotspot setup.
Internet------>Modem-------->(RB4750g)>PublicIP---Interface1-gateway---->Hotspot-Interface2----->AP bridge-->wireless<--------->Station-bridge----->WirelessAP---->Wireless Hotspot Clients.
If I want to add another separate (DHCP group) pool of Wireless clients through another Wireless AP but using the same terminating AP at the router(RB750G).
What is the most sensible way to add this second IP pool on the same interface?
Do I need to create a VLAN on the Hotspot interface?
Or, create another IP pool and another Hotspot server on the same interface?
Or can this all be done in UserManager?
I'd be experimenting but I presently have some paying customers I don't want to suffer the fallout of my learning how to Hotspot.
Thanks
 
fewi
Forum Guru
Forum Guru
Posts: 7717
Joined: Tue Aug 11, 2009 3:19 am

Re: How to add hotspot segment

Tue Jul 06, 2010 6:43 am

The Hotspot should be the layer 3 hop, or you're asking for trouble. The best way to go would be feeding the 750G VLANs on the inside and running separate Hotspot server instances on the VLAN interfaces.
 
someuser
Member Candidate
Member Candidate
Topic Author
Posts: 102
Joined: Tue Apr 13, 2010 7:05 am

Re: How to add hotspot segment

Tue Jul 06, 2010 8:15 am

The Hotspot should be the layer 3 hop, or you're asking for trouble. The best way to go would be feeding the 750G VLANs on the inside and running separate Hotspot server instances on the VLAN interfaces.
Thanks fewi for the response,
I read something about the RB750G being minimal as far as Ram goes and understanding it's basically a SOHO device.
Would this device be able to handle say 100+ users? with 1 or 2 Vlan ?
Should this be done on a say a P4 box with 1-2 gig ram?
 
fewi
Forum Guru
Forum Guru
Posts: 7717
Joined: Tue Aug 11, 2009 3:19 am

Re: How to add hotspot segment

Tue Jul 06, 2010 5:56 pm

Maybe, but at 100+ users I'd upgrade to something like the 450G - still very affordable given the amount of users.

I strongly prefer RouterBOARDs to custom built hardware, but that's just me.
 
adrianatkins
Long time Member
Long time Member
Posts: 556
Joined: Wed Sep 05, 2007 10:34 am
Location: Spain
Contact:

Re: How to add hotspot segment

Wed Jul 07, 2010 11:55 pm

Amazingly i tried a 750G for about 200 punters, and 2 lines using PCC - it doesn't even break sweat.

Make sure you got the connection tracking timeouts sensible though.

The default TCP timeout is 24 hours for some really wierd reason.
 
adrianatkins
Long time Member
Long time Member
Posts: 556
Joined: Wed Sep 05, 2007 10:34 am
Location: Spain
Contact:

Re: How to add hotspot segment

Wed Jul 07, 2010 11:58 pm

The RAM requirement is about 340 bytes per NATted connection, so about 22 Mb total for all possible 65535 masqueraded source ports.

If your Conntrack timeout is say 2 minutes, it doesn't seem to ever fill up.

Isn't technology amazing ?

Who is online

Users browsing this forum: Bing [Bot], moorezilla and 60 guests