I have just set up a remote site using RB433AH on both ends and rh52 cards. I am using 5260 as the freq. using the tools it is a clear channel.
I have a -52 signal strength on both ends. BUT the TX/RX rate is 54mps 6mps
I need to figure out why the receive is so low on the remote site. with just 6 mb I can't hook up many clients.
The main site is using 3.30 and the remote site is 4. something.
the floor is about -100 so I have 40+ difference.
WHY is the rate so low on RX?
Thanks for your help