Community discussions

MikroTik App
 
Myron
Member Candidate
Member Candidate
Topic Author
Posts: 253
Joined: Sat Sep 05, 2009 3:17 am
Location: Boracay, Philippines

RB750G cpu issue

Tue Oct 12, 2010 10:14 am

hey guys i have my new 2 same rb750g the other one shows 400mhz only, this could be 680Mhz right?
][paradisegarden@ParadiseGarden Manila] /system routerboard> print
routerboard: yes
model: "750G"
serial-number: "xxxxxxxxxxxx"
current-firmware: "2.27"
upgrade-firmware: "2.27"
[paradisegarden@ParadiseGarden Manila] /system license> print
    software-id: "xxxx-xxxx"
  upgradable-to: v6.x
         nlevel: 4
       features: 
[paradisegarden@ParadiseGarden Manila] /system resource> print
                   uptime: 22m58s
                  version: "4.11"
              free-memory: 14232kB
             total-memory: 29944kB
                      cpu: "MIPS 24K V7.4"
                cpu-count: 1
            cpu-frequency: 400MHz
                 cpu-load: 3
           free-hdd-space: 29932kB
          total-hdd-space: 61440kB
  write-sect-since-reboot: 374
         write-sect-total: 562095
               bad-blocks: 0%
        architecture-name: "mipsbe"
               board-name: "RB750G"
                 platform: "MikroTik"
any input? thanks thanks
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB750G cpu issue

Wed Oct 13, 2010 8:46 am

email support with the serial number and softid that you have blacked out here.
 
Myron
Member Candidate
Member Candidate
Topic Author
Posts: 253
Joined: Sat Sep 05, 2009 3:17 am
Location: Boracay, Philippines

Re: RB750G cpu issue

Wed Oct 13, 2010 9:39 am

Hello Normis

Support Ticket#2010101366000127

thanks
 
Myron
Member Candidate
Member Candidate
Topic Author
Posts: 253
Joined: Sat Sep 05, 2009 3:17 am
Location: Boracay, Philippines

Re: RB750G cpu issue

Wed Oct 13, 2010 10:48 am

normis it seems the cpu seeting is change now :) but the box not yet rebooted

[paradisegarden@ParadiseGarden Manila] /system routerboard settings> set cpu-frequency=680

[paradisegarden@ParadiseGarden Manila] /system routerboard settings> print
boot-device: nand-if-fail-then-ethernet
cpu-frequency: 680MHz
boot-protocol: bootp
force-backup-booter: no
silent-boot: no
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB750G cpu issue

Wed Oct 13, 2010 11:00 am

you still need to reboot it to apply this setting permanently
 
Myron
Member Candidate
Member Candidate
Topic Author
Posts: 253
Joined: Sat Sep 05, 2009 3:17 am
Location: Boracay, Philippines

Re: RB750G cpu issue

Wed Oct 13, 2010 5:46 pm

you still need to reboot it to apply this setting permanently
thanks normis for the assistance.

cheers

Who is online

Users browsing this forum: CGGXANNX and 70 guests