Community discussions

MUM Europe 2020
 
arpadffy
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 50
Joined: Mon Jan 17, 2011 1:52 am
Location: Stockholm, Sweden
Contact:

ROS 5.0rc9 system reset problem

Sun Feb 13, 2011 11:40 pm

Hello,

I experienced a strange problem.
After performing a system reset on a RB450G with 5.0.rc9 ether1-gateway is not able to get IP address by DHCP (that otherwise works OK)

Can anybody find from the attached full export what is the problem?

Thank you.

Regards,
Z
You do not have the required permissions to view the files attached to this post.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6617
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: ROS 5.0rc9 system reset problem

Mon Feb 14, 2011 11:47 am

Configuration is fine, I do not see any problem.
Do you have established link on Ether1, when you check /interface ethernet monitor ethe1x?
 
arpadffy
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 50
Joined: Mon Jan 17, 2011 1:52 am
Location: Stockholm, Sweden
Contact:

Re: ROS 5.0rc9 system reset problem [solved]

Fri Feb 18, 2011 12:24 am

Hello,

you had right. The reset is OK... once I tested on another uplink (read ISP) worked perfect.

Thank you.

Regards,
Z

Who is online

Users browsing this forum: No registered users and 47 guests