Page 1 of 1

ROS 5.0rc9 system reset problem

Posted: Sun Feb 13, 2011 11:40 pm
by arpadffy
Hello,

I experienced a strange problem.
After performing a system reset on a RB450G with 5.0.rc9 ether1-gateway is not able to get IP address by DHCP (that otherwise works OK)

Can anybody find from the attached full export what is the problem?

Thank you.

Regards,
Z

Re: ROS 5.0rc9 system reset problem

Posted: Mon Feb 14, 2011 11:47 am
by sergejs
Configuration is fine, I do not see any problem.
Do you have established link on Ether1, when you check /interface ethernet monitor ethe1x?

Re: ROS 5.0rc9 system reset problem [solved]

Posted: Fri Feb 18, 2011 12:24 am
by arpadffy
Hello,

you had right. The reset is OK... once I tested on another uplink (read ISP) worked perfect.

Thank you.

Regards,
Z