Community discussions

 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

no support for freq. above 5825 for RB711-5Hn-MMCX

Sat Jul 23, 2011 12:56 pm

i see there is no support for freq. above 5825 for RB711-5Hn-MMCX

in India following is the case...

Use of wireless equipment in the 5.825 to 5.875 GHz.- Notwithstanding anything contained in any law for the time being in force, no licence shall be required by any person to establish, maintain, work, possess or deal in any wireless equipment for the purpose of low power Wireless Access System, including Radio Local Area Networks, in the frequency band of 5.825 to 5.875 GHz with the Maximum Effective Isotropic Radiated Power and maximum power of transmitter as specified in the Table below, namely:-

Frequency band : 5.825 to 5.875 GHz

Maximum power of transmitter : 1 W (30 dbm) in spread of 10 MHz or higher

Maximum Effective Isotropic Radiated Power : 4 Watt peak or 36 dbm
how can i overcome this issue and use all freq. from 5825 to 5875 ??

-sid
by professionals, for professionals....
Don't forget to give KARMA!!!
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Sat Jul 23, 2011 7:07 pm

help!!!!!!!
by professionals, for professionals....
Don't forget to give KARMA!!!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24276
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 8:51 am

What is the issue exactly? Simply set the wireless card to use one of the allowed frequencies (5.825 to 5.875 )...
No answer to your question? How to write posts
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 11:20 am

hi normis,

thank you for looking into the matter.

in the drop down menu for selecting frequencies i have no option beyond 5825.

5825 is at the end of the list.

-sid
by professionals, for professionals....
Don't forget to give KARMA!!!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24276
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 11:29 am

did you set wireless mode to "regulatory domain" and country to "India"? if no, please do so, and the dropdown list will contain frequencies allowed in India.
No answer to your question? How to write posts
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 7:44 pm

hi normis...

i tried what you said.. still no luck :( screenshots attached below:
freq01.png
freq02.png
although when i shift to SUPERCHANNEL i can see a lot of frequencies.... but when i switch to any more than 5825 on both the link fails...

please help.
You do not have the required permissions to view the files attached to this post.
by professionals, for professionals....
Don't forget to give KARMA!!!
 
wireless12
Member Candidate
Member Candidate
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 8:05 pm

hi normis...

i tried what you said.. still no luck :( screenshots attached below:
freq01.png
freq02.png
although when i shift to SUPERCHANNEL i can see a lot of frequencies.... but when i switch to any more than 5825 on both the link fails...

please help.
.
i think u have configured a ptp wireless transparent link using MPLS/Vpls, if so then u cant use those frequencies which are not marked as BOLD or in dark black in frequency list.
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 8:34 pm

hey thanx for the reply...

but that sounds strange.... :shock:

-sid
by professionals, for professionals....
Don't forget to give KARMA!!!
 
wireless12
Member Candidate
Member Candidate
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Mon Jul 25, 2011 8:36 pm

hey thanx for the reply...

but that sounds strange.... :shock:

-sid
ji haan sarkar mere saath bhi aisa he hai.......
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24276
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Tue Jul 26, 2011 7:57 am

i think u have configured a ptp wireless transparent link using MPLS/Vpls, if so then u cant use those frequencies which are not marked as BOLD or in dark black in frequency list.
this is wrong!

if your link fails, it means that the other end of the link doesn't support the selected frequency. what device is on the other end? if it's a mikrotik device, you need to also configure scan-list in it.
No answer to your question? How to write posts
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Tue Jul 26, 2011 12:46 pm

RB711-5Hn-MMCX at both ends.

Link does not fail.

No frequency beyond 5825 in the dropdown table.
by professionals, for professionals....
Don't forget to give KARMA!!!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24276
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Tue Jul 26, 2011 12:48 pm

in this case, other frequencies are not allowed in India. if you think the list is wrong, email mikrotik support with a document that shows which frequencies are allowed in india.
No answer to your question? How to write posts
 
wireless12
Member Candidate
Member Candidate
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Tue Jul 26, 2011 5:48 pm

i think u have configured a ptp wireless transparent link using MPLS/Vpls, if so then u cant use those frequencies which are not marked as BOLD or in dark black in frequency list.
this is wrong!

if your link fails, it means that the other end of the link doesn't support the selected frequency. what device is on the other end? if it's a mikrotik device, you need to also configure scan-list in it.
@normis i have one such kind of link and FYI the hardware is exactly same on both ends one end is configured as bridge while the other end as station(as mentioned in tutorial in WIKI) and i can also see all frequencies in drop menu when i select superchannel, both end has a goove5 and a 5.8 27 dbi grid antenna..even the cat5 cable is of same company and even the POE and adaptor are same too.
Regards..
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Topic Author
Posts: 757
Joined: Thu Oct 15, 2009 3:52 am

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

Wed Jul 27, 2011 5:55 am

i have sent and email with the attachment of the notification to support@mikrotik.com as directed.

i am also uploading the file here.

-sid
You do not have the required permissions to view the files attached to this post.
by professionals, for professionals....
Don't forget to give KARMA!!!

Who is online

Users browsing this forum: No registered users and 28 guests